Rubber Sheets

Sizes: 1~40mm x 0.5~1.20mtr x 10mtr

MULTIPURPOSE RUBBER SHEET

Multipurpose Rubber Sheets are an all-purpose rubber sheets available generally in black colour and made from Ethylene Propylene Diene Monomer, commonly known, as EPDM Rubber. It has high temperature and chemical resistance to most acids and alkalis. It is UV stable making it highly resistant to ozone effects and withstand extreme weather conditions thus ideal for both indoor & outdoor applications.

COMMERCIAL RUBBER SHEET

Commercial Rubber Sheet has been designed for use as a general purpose, strip, pad, lining or gasket and is mainly used for Sealing, Insulating, Isolating and Protecting, steel or other surfaces. It can be used in a wide range of applications

Sizes: 1~40mm x 0.5~1.20mtr x 10mtr

Sizes: 1~40mm x 0.5~1.20mtr x 10mtr

NATURAL RUBBER SHEET

These Sheets exhibits excellent physical properties including a moderate abrasion and temperature resistance. Can be used for Service Temperature up to +80° C. However, it has poor resistance to Petroleum based uids, Ozone and Sunlight.

SHOT BLASTING RUBBER SHEET

These Sheets exhibits excellent physical properties including a moderate abrasion and temperature resistance. Can be used for Service Temperature up to +80° C. However, it has poor resistance to Petroleum based uids, Ozone and Sunlight.

Sizes: 2~12mm x 0.5~1.20mtr x 10mtr

Sizes: 3~50mm x 0.6~1.20mtr x 10mtr

ABRASION RESISTANT RUBBER SHEET

Abrasion Resistant Rubber Sheet is a tear and impact resistant, highly elastic, wear resistant natural rubber sheet blended with special synthetic polymers having excellent resistance to large particle impact and dry sliding abrasion.

SKIRT BOARD RUBBER SHEET

These Sheets exhibits excellent physical properties including a moderate abrasion and temperature resistance. Can be used for Service Temperature up to +80° C. However, it has poor resistance to Petroleum based uids, Ozone and Sunlight.

Sizes: 2~12mm x 0.5~1.20mtr x 10mtr

Sizes: 1~50mm x 0.6~1.20mtr x 10mtr

INSERTION RUBBER SHEET

Insertion Rubber Sheet is manufactured out of natural rubber (also available NBR Rubber Blend) with one or more layers of tear resistant cotton/nylon fabric reinforcement.The nylon monofilament fabric reinforcement prevents fluid penetration and gives the natural insertion sheet improved tear strength and dimensional stability, making it suitable for gasket sealing applications.

BUTYL RUBBER SHEET

These are sheets, with very good weathering resistance as well as a moderate resistance to Petroleum based Fluids. Excellent di-electric properties and low permeability to air makes it versatile for many electrical applications. Used extensively for general engineering applications like Gaskets. Grommets and Tank Lining, Seal and Packing.

Sizes: 1~50mm x 0.6~1.20mtr x 10mtr

Sizes: 1~50mm x 0.6~1.20mtr x 10mtr

EPDM RUBBER SHEET

These Rubber Sheets find use in various applications where it is to have a relatively wider service temperature range -40°C to + 120°C and excellent ageing resistance is required. They have excellent compatibility with a wide range of chemicals and Intermediates. These rubber sheets are used extensively in the Chemical and Pharmaceutical Industries,Fertilizer Plant and Steel Units.

NEOPRENE RUBBER SHEET

Besides resistance to Petroleum Products,Neoprene Sheets also withstand a higher service temperature range of -40°C to +120°C. They can be compounded for an excellent resistance to most of the acids and alkali’s as well as to open flame. These Sheets are widely used for various applications in refineries, food industry, chemical and process units.

Sizes: 2~50mm x 0.5~1.20mtr x 10mtr

Sizes: 2~50mm x 0.6~1.20mtr x 10mtr

NITRILE RUBBER SHEET

These Sheets finds an application in areas where service temperature is as high as +100°C. Good Physical properties like abrasion resistance and good ageing resistance. They have excellent resistance to Petroleum Products and typically find its use in applications like Diaphragms,Floating Roof Tanks, Oil Resistant Seals and Gaskets.

FKM RUBBER SHEET

Rubber Sheets of FKM are used for very specific applications needing a combination of heat resistance and corrosion resistance. These sheets exhibit outstanding resistance to ageing and are flame retardant. It has got excellent Oil and heat resistance, at high temperatures

Sizes: 2~50mm x 0.6~1.20mtr x 10mtr

Sizes: 1~40mm x 0.5~1.20mtr x 10mtr

SILICON RUBBER SHEET

These Sheets retain their electro metric properties at temperatures well beyond most other rubbers. They withstand continuous exposure at 200° C. Excellent dielectric properties. High resistance to Ozone Oxygen and high intensity ultraviolet radiation. Good resistance to oil, greases and a wide range of chemicals, acids & alkalis.

ASTM-D-178 INSULATING MATS